10 Steps to Bleed & Restart Your Furnace after Running Out of Heating Oil
- Step 1: Fill the Fuel Tank.
- Step 2: Hit the Reset Button.
- Step 3: Turn off the Furnace.
- Step 4: Collect Your Tools.
- Step 5: Find the Bleeder Valve.
- Step 6: Attach Nylon Tubing.
- Step 7: Turn on the Furnace and Unscrew the Valve.
- Step 8: Tighten the Valve.
Keeping this in consideration, how do you bleed an Olsen oil furnace?
Part 2 Bleed the Furnace
- Use a small crescent wrench or pliers to slightly loosen the bleed screw.
- Push the reset button on the furnace to turn it back on.
- Tighten the screw as soon as the air stops sputtering out and a steady stream of fuel pours out.
- Let the furnace continue to run.
Additionally, why do I have to keep bleeding my oil furnace? Typically, the reason for bleeding the furnace has to do with fuel levels: If you let the oil completely run out, that’s when the furnace may need extra help starting up again. To prevent this problem, refill the tank before the oil gets extremely low. You’ll also keep yourself from freezing when the furnace shuts off.
Also know, what happens when furnace runs out of oil?
Running out of heating oil can cause the furnace to build up sludge which clogs the filter and prevents the heating system from working properly. Sludge occurs when too much dirt, dust, or grime settles in your oil tank, typically at the bottom.
Why do I have to reset my oil furnace?
Obstructed airflow: Sometimes the reset button gets tripped because the furnace isn’t receiving enough airflow. Make sure to clean the air filters and keep enough vents open so the furnace has enough air to operate and clean the blower wheel as well. In this case, you’ll need to add more fuel and then reset the burner.