If your toilet is making a vibrating sound around the wall whenever the toilet is flushed the problem usually has to do with the fill valve. More specifically, the diaphragm gasket inside the fill valve can wear down, lose elasticity, and harden. First, remove the toilet tank lid and locate the float.
Besides, why does my toilet randomly run for a few seconds?
The most common issue with toilets randomly flushing is that the flapper has become brittle or sediment has formed on the flapper/tank which prevents the flapper making a complete seal. If enough water is permitted to leak out of the tank, the filling mechanism will be triggered and the tank will refill.
Also, how do you fix a toilet that runs randomly? How to Fix a Toilet That Randomly Runs
- Lift the lid away from the tank.
- Lengthen the lift chain if necessary. The lift chain attaches the back of the handle to a rubber disk on the bottom of the tank called a flapper.
- Replace the float ball, as it may be leaking.
- Adjust the float height.
- Clean the valve seat to remove any burs or sediment deposits.
Also to know, why does my toilet make a noise randomly?
A toilet that sounds like it flushes itself is suffering from a leak inside the tank. A toilet does not flush by itself, even though your toilet makes flushing noises when nobody is in the bathroom at the time. A mechanical condition with a toilet will cause it to sound as if it is being flushed by an unseen force.
Why does my toilet run water every few minutes?
A toilet that cuts on and off by itself, or runs intermittently, has a problem that plumbers call a phantom flush. The cause is a very slow leak from the tank into the bowl. The solution is to drain the tank and bowl, check and clean the flapper seat, and replace the flapper if it’s worn or damaged.